Cisco Cisco Access Registrar 4.2 Specifikace stáhnout pdf (Strana 464)

100

101

10-22

Cisco Wireless LAN Controller Configuration Guide

OL-13826-01

Chapter 10 Configuring Radio Resource ManagementWireless Device Access

Configuring Dynamic RRM

Figure 10-6 802.11a > RRM > DCA Page

The DCA Channels field shows the channels that are currently selected.

b. To select a channel, check its check box in the Select column. To exclude a channel, uncheck its

check box.

Range:

802.11a—36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161,

165, 190, 196

802.11b/g—1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11

Default:

802.11a—36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161

802.11b/g—1, 6, 11

c. Click Apply to commit your changes.

d. Click Save Configuration to save your changes.

Step 6 Repeat this procedure to set the same parameter values for every controller in the RF group.

Using the CLI to Configure Dynamic RRM

Follow these steps to configure dynamic RRM using the CLI.

Step 1 Enter this command to disable the 802.11a or 802.11b/g network:

config {802.11a | 802.11b} disable

Step 2 Perform one of the following:

• To have RRM automatically configure all 802.11a or 802.11b/g channels based on availability and

interference, enter this command:

config {802.11a | 802.11b} channel global auto

• To have RRM automatically reconfigure all 802.11a or 802.11b/g channels one time based on

availability and interference, enter this command:

config {802.11a | 802.11b} channel global once

1 2 ... 459 460 461 462 463 464 465 466 467 468 469 ... 635 636

Komentáře k této Příručce

Žádné komentáře

Cisco Cisco Access Registrar 4.2 Specifikace Strana 464

Komentáře k této Příručce