Cisco Cisco Access Registrar 4.2 Specifikace stáhnout pdf (Strana 437)

100

101

9-27

Cisco Wireless LAN Controller Configuration Guide

OL-13826-01

Chapter 9 Managing User Accounts

Configuring Wired Guest Access

Step 13 In the Profile Name field, enter a name that identifies the guest LAN. Do not use any spaces.

Step 14 In the WLAN SSID field, enter an SSID that identifies the guest LAN. Do not use any spaces.

Step 15 Click Apply to commit your changes. The WLANs > Edit page appears (see Figure 9-19).

Figure 9-19 WLANs > Edit Page

Step 16

Check the Enabled check box for the Status parameter.

Step 17 Web authentication (Web-Auth) is the default security policy. If you want to change this to web

passthrough, click the Security tab after completing Step 18 and Step 19.

Step 18 From the Ingress Interface drop-down box, choose the VLAN that you created in Step 3. This VLAN

provides a path between the wired guest client and the controller by way of the Layer 2 access switch.

Step 19 From the Egress Interface drop-down box, choose the name of the interface. This WLAN provides a path

out of the controller for wired guest client traffic.

Note If you have only one controller in the configuration, choose management from the Egress

Interface drop-down box.

Step 20 If you want to change the authentication method (for example, from web authentication to web

passthrough), click Security > Layer 3. The WLANs > Edit (Security > Layer 3) page appears (see

Figure 9-20).

Figure 9-20 WLANs > Edit (Security > Layer 3) Page

1 2 ... 432 433 434 435 436 437 438 439 440 441 442 ... 635 636

Komentáře k této Příručce

Žádné komentáře

Cisco Cisco Access Registrar 4.2 Specifikace Strana 437

Komentáře k této Příručce