Cisco 7600-ES20-GE3CXL-RF - Ethernet Services 20G Line Card Switch Uživatelský manuál Strana 66

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 398
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 65
512
Caveats for Cisco IOS Release 12.2(33)SRD through 12.2(33)SRD8
OL-10394-05 Rev. R0
Workaround: Do not use the traceroute mac src_mac dst_mac command. Use a specific VLAN ID
when using this command.
CSCtc60958
Symptoms: After the line card reset or router reload, the CLI (committed as part of CSCtb88169)
does not get applied.
Conditions: The issue is seen with a router reload or line card reset.
Workaround: Reconfigure the command manually once the line card is up.
CSCtc61025
Symptoms: For VPLS autodiscovered pseudowires using FEC129, the label release message is not
understood by the peer in Inter-op tests.
Conditions: The symptom is observed when you delete the VFI or shut the attachment circuit to
cause the label withdraw message to be sent. The peer will correspondingly send the label release
message.
Workaround: There is no workaround.
CSCtc75774
Symptoms: Protect channel shows signal failure with working channel even though working channel
is up and working correctly.
Conditions: The symptom is observed when the protect channel acts as an active controller and when
you do a shut/no shut on the working channel which acts as an inactive controller.
Workaround: There is no workaround.
CSCtc77028
Symptoms: A Cisco 10000 series router with a mix of passthrough, TAL, prepaid and postpaid
sessions may experience a memory leak at sss_pm_post_authorization_cleanup.
Conditions: The symptom is observed on a Cisco 10000 series router running a PRE-3 and
Cisco IOS Release 12.2(33)SB7.
Workaround: Reload the router.
CSCtc81653
Symptoms: The system crashes if the port-channel is removed while it is serving data traffic.
Conditions: Port-channel is configured with the member links in it. The traffic is sent through the
port-channel. If the port-channel is removed, the system sometimes crashes.
Workaround: There is no workaround.
CSCtc84758
Symptoms: On a router configured for ISG that is running postpaid Web-Logon users with SESM
as the external portal, a memory leak may occur in RADIUS LOCAL SERVER.
Conditions: The symptom is observed on a Cisco 10000 series router with a PRE-3 and running
Cisco IOS Release 12.2(33)SB7 using SESM as a captive portal. The issue can be triggered with this
sequence of events:
1. Postpaid user is redirected to SESM.
2. SESM sends Access-Request to router after captivating user/pass from postpaid user.
3. RADIUS LOCAL SERVER creates AAA request and sends it to ISG.
4. ISG creates another AAA request to send an Access-Request to authenticate the postpaid user.
Zobrazit stránku 65
1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 397 398

Komentáře k této Příručce

Žádné komentáře