Cisco 7600-ES20-GE3CXL-RF - Ethernet Services 20G Line Card Switch Uživatelský manuál Strana 240

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 398
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 239
686
Caveats for Cisco IOS Release 12.2(33)SRD through 12.2(33)SRD8
OL-10394-05 Rev. R0
00:34:51: %FRR_OCE-STDBY-3-GENERAL: Primary interface number and OCE do not match.
00:34:51: %SYS-STDBY-2-CHUNKFREE: Attempted to free nonchunk memory, chunk 531555D8,
data 531554E0.
2. Followed immediately by a crash
Conditions: This symptom occurs when performing an SSO switchover.
Workaround: There is no workaround.
CSCse15434
Symptoms: When running Inverse Multiplexing over ATM (IMA) on a router with shaping
parameters configured under the vc-class atm global configuration command, the shaping
parameters will be removed upon a reload of the router.
Conditions: This symptom has been observed on a router with shaping parameters configured under
the vc-class atm global configuration command for an IMA interface of
PA-A3-8T1IMA/PA-A3-8E1 IMA PA.
Workaround: Configure the native ATM shaping directly under the PVC instead of using a vc-class.
CSCse52929
Symptoms: PA-MC-8TE1+ is not recognized by router.
Conditions: PA-Mc-8TE1+ inserted on a Cisco 7200 with NPE-g2 and running ipbase, ipbasek9,
entbase, or advsecurityk9 images.
Workaround: There is no workaround.
CSCse65277
Symptoms: Standby reloads due to default ISIS metric maximum returns parser error.
Conditions: This issue is observed while configuring the ISIS metric maximum on an interface by
using the isis metric maximum command and later changing it in to the default metric value.
Trigger: At this point, it will show the error, and the communication with the peer Supervisor has
been lost then the standby reloads.
Workaround: There is no workaround.
CSCsf21629
Symptoms: In a system with a redundant Supervisor 720 Engine, the etherchannel member ports
may flap after SSO.
Conditions: The symptoms are observed when running LACP and on the first SSO only.
Workaround: There is no workaround.
CSCsg00173
Symptoms: Traffic blackholing is seen in DFC-based PVLAN configuration.
Condition: The RPF Vlan has to be programmed as secondary VLAN in the hardware tables for
PVLAN to work with multicast. This condition is not satisfied in case of DFC as the primary Vlan
gets programmed as RPF Vlan. The problem is not seen on the supervisor.
Workaround: There is no workaround.
CSCsg21394
Symptoms: A router reloads unexpectedly because of malformed DNS response packets.
Conditions: This symptom is observed when you configure name-server and domain lookup.
Workaround: Configure the no ip domain lookup command to stop the router from using DNS to
resolve hostnames.
Zobrazit stránku 239
1 2 ... 235 236 237 238 239 240 241 242 243 244 245 ... 397 398

Komentáře k této Příručce

Žádné komentáře