Cisco DPA 7610 Uživatelský manuál Strana 7

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 22
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 6
7
Open Caveats
78-12814-03
Open Caveats
CSCuk31143 In some circumstances, the
DPA 7610 does not integrate
properly with 7 digit extensions
(or longer) when connected to an
Octel 200.
Direct calls are seen as being external and are
assumed not to have mailboxes. Forwarded calls
are directed to the correct mailbox, but the calling
party ID will be lost if it is 7 or more digits long.
This is caused by misconfiguration of the LSP
table on the Octel 200. To fix this problem,
contact your Octel supplier in order to get this
configuration change made.
CSCdx48181 Faxes to an Octel 250 system,
using fax pass through are not
always received properly.
This might happen when leaving or sending a fax
using an Octel 250 system via a DPA 7630/7610.
Faxes are much more likely to succeed using
Cisco Fax Relay. Ensure that the DPA has fax
relay enabled. To enable it, from the main menu,
choose Configure > CallManager > Fax Relay.
Ensure that any gateways by which faxes are sent
or received from the Octel 250 have fax relay
enabled.
Certain fax machines and gateways are more
reliable than others so trying different faxes and
gateways might increase the reliability of fax pass
through.
CSCdx83586 Faxes to or from an Octel 200
system via a DPA are unreliable,
with pages missing from faxes,
and frequent failures.
This can happen on an Octel 200 system with a
DPA 7610/7630, in both fax pass through and
Cisco fax relay mode.
Faxes are much more likely to succeed using
Cisco Fax Relay. Ensure that the DPA has fax
relay enabled. To enable it, from the main menu,
choose Configure > CallManager > Fax Relay.
Certain fax machines and gateways are more
reliable than others so trying different faxes and
gateways might increase the reliability of fax pass
through.
Table 2 DPA 7630/7610 Open Caveats (continued)
Bug ID Summary Explanation
Zobrazit stránku 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 21 22

Komentáře k této Příručce

Žádné komentáře