Cisco DPA 7610 Uživatelský manuál stáhnout pdf (Strana 4)

Cisco CallManager Compatibility

Improved Fax Support

78-12814-03

Improved Fax Support

The DPA 7630/7610 supports Cisco fax relay. Cisco fax relay provides a more

reliable method of transporting fax data over the IP network rather than sending

the fax information as a voice call. However, the terminating device must also

support Cisco fax relay.

By default, Cisco fax relay is enabled on the DPA 7630/7610. To disable Cisco

fax relay choose Configure > CallManager > Fax Relay from the main menu.

For more details, refer to the Cisco DPA 7630/7610 Voice Mail Gateways

Administration Guide:

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_access/7630adpt/dpa_

v1_3/admin_gd/7630conf.htm#xtocid17

Support for Multiple Cisco CallManager Clusters

If you are using Cisco CallManager clusters, MWI commands do not propagate

across inter-cluster links. Because of this, the DPA 7630/7610 can set MWIs only

for those extensions located on the same Cisco CallManager cluster as the

DPA 7630/7610 itself. Therefore, to support multiple clusters, you need to add

additional DPA 7630/7610 devices.

You can connect up to two DPA 7630/7610 systems to each other in a daisy-chain

format. The specific configurations depend upon whether you are using these in

simple or hybrid situations.

For more details, refer to the Cisco DPA 7630/7610 Voice Mail Gateways

Administration Guide:

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_access/7630adpt/dpa_

v1_3/admin_gd/7630int.htm#xtocid21

Cisco CallManager Compatibility

Version 1.3(1) of the DPA software requires Cisco CallManager 3.1 or later. You

cannot use Cisco CallManager 3.0 or previous releases with this software update.

1 2 3 4 5 6 7 8 9 ... 21 22

Žádné komentáře

Cisco DPA 7610 Uživatelský manuál Strana 4