Cisco DPA 7610 Uživatelský manuál stáhnout pdf (Strana 3)

Improvements in Fail-Over Support

78-12814-03

New and Changed Information

Improvements in Fail-Over Support

If you are using multiple DPA 7630/7610 systems in your network for

redundancy, you can improve the system’s response in a fail-over situation by

disabling Octel ports if:

• Cisco CallManager goes down—Disables a DPA 7630/7610 Octel port when

the connection to the corresponding DPA 7630/7610 port on Cisco

CallManager

• PBX goes down—Disables a DPA 7630/7610 Octel port only when the

corresponding PBX port is down. In simple mode, this command has no

effect. In hybrid mode, the Octel port will be disabled when the DPA notices

the corresponding PBX port is down.

• Either Cisco CallManager or the PBX go down—Disables a DPA 7630/7610

Octel port when either the connection to the PBX or to Cisco CallManager is

lost.

• Both Cisco CallManager and the PBX go down—Disables a DPA 7630/7610

Octel port when both the connection to the PBX or to Cisco CallManager is

lost.

The disable policy is designed to prevent the Octel system from assuming a port

is up when there is not an active Cisco CallManager or PBX connection.

Changing this policy can prevent the Octel system from attempting outgoing calls

or setting MWIs.

For more details, refer to the Cisco DPA 7630/7610 Voice Mail Gateways

Administration Guide:

• For the DPA 7630

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_access/7630adpt/

dpa_v1_3/admin_gd/7630conf.htm#xtocid4

• For the DPA 7610

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_access/7630adpt/

dpa_v1_3/admin_gd/7630conf.htm#xtocid10

1 2 3 4 5 6 7 8 ... 21 22

Žádné komentáře

Cisco DPA 7610 Uživatelský manuál Strana 3