Cisco 4G-LTE-ANTM-O-3 Instalační příručka stáhnout pdf (Strana 275)

100

101

DETAILED STEPS

PurposeCommand or Action

Enters radio interface mode, indicated by the ap(config-if) prompt.interface Dot11Radio 0

Example:

ap(config)# interface Dot11Radio 0

Step 1

Configures the DTIM interval that is included in beacon frames

to inform clients of when next to expect buffered data from the

AP.

dtim-interval number-of-beacons

Example:

ap(config-if)# dtim-interval 255

Step 2

number-of-beacons—Range is 1 to 255 beacons.

Default is 1

Configuring the Beacon Interval

To set the beacon interval, follow these steps from global configuration mode:

SUMMARY STEPS

interface Dot11Radio 0

beacon-interval number-of-milliseconds

DETAILED STEPS

PurposeCommand or Action

Enters radio interface mode, indicated by the ap(config-if)

prompt.

interface Dot11Radio 0

Example:

ap(config)# interface Dot11Radio 0

Step 1

Configures the beacon interval.

beacon-interval number-of-milliseconds

Step 2

Example:

ap(config-if)# beacon-interval 65535

number-of-milliseconds—range is 1 to 65535 milliseconds

(ms) and default value is 100 milliseconds.

Configuring the Radio Transmit Power

To set the radio transmit power for WLAN, follow these steps from global configuration mode:

Cisco 800 Series Integrated Services Routers Software Configuration Guide

OL-31704-02 247

Configuring Wireless Devices

Configuring WLAN Using the CLI-based Interface

1 2 ... 270 271 272 273 274 275 276 277 278 279 280 ... 443 444

Komentáře k této Příručce

Žádné komentáře

Cisco 4G-LTE-ANTM-O-3 Instalační příručka Strana 275

Komentáře k této Příručce

Související produkty a manuály pro Směrovače Cisco 4G-LTE-ANTM-O-3