Configuring the MAC Address Filter Mode
To select the MAC address access list mode, follow these steps from global configuration mode:
SUMMARY STEPS
1.
dot11 {ssid | guest-ssid} [guest-SSID-number] SSID-name
2.
[no] mac-filter-mode [allow | deny]
DETAILED STEPS
PurposeCommand or Action
Enters SSID configuration mode for a specific SSID. The ap(config-ssid)
prompt indicates SSID configuration mode.
dot11 {ssid | guest-ssid} [guest-SSID-number]
SSID-name
Step 1
Example:
ap(config)# dot11 guest-ssid 1 guestssid1
• ssid—The main SSID.
• guest-ssid—A guest SSID.
• guest-SSID-number—The guest SSID number. Use this only with
the guest-ssid option.
• SSID-name—The SSID name.
Configures the mode for the MAC address filter feature.[no] mac-filter-mode [allow | deny]
Step 2
Example:
ap(config-ssid)# mac-filter-mode allow
• allow—To allow MAC addresses on the access list to connect:
• deny—To deny MAC addresses on the access list from connecting:
Example:
Configuring Radio Channel
To configure channel options, follow these steps from global configuration mode:
SUMMARY STEPS
1.
interface Dot11Radio 0
2.
channel {channel-number | least-congested} [timer minutes-before-next-scan]
Cisco 800 Series Integrated Services Routers Software Configuration Guide
OL-31704-02 237
Configuring Wireless Devices
Configuring WLAN Using the CLI-based Interface
Komentáře k této Příručce