Cisco 4G-LTE-ANTM-O-3 Instalační příručka stáhnout pdf (Strana 161)

100

101

PurposeCommand or Action

Exits configuration mode.end

Example:

Router(config-if)# end

Step 5

What to Do Next

For additional information, see the information at the following URL:

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/ layer2.html

VLANs on the GE Port and GE ESW Port of Wireless APs

Because the GE port is an internal interface that services only the embedded access point of the router, it

cannot be configured only with the switchport access vlan X command, where X is other than 1. It may,

however, be configured in trunk mode. This may be done by performing the following steps, beginning in

global configuration mode.

SUMMARY STEPS

interface type number

switchport mode trunk

switchport access vlan vlan_id

DETAILED STEPS

PurposeCommand or Action

Selects the Gigabit Ethernet port to configure.

interface type number

Example:

Router(config)# Interface gigabitethernet0

Step 1

Places the port in trunk mode.switchport mode trunk

Example:

Router(config-if)# switchport mode trunk

Step 2

(Optional) Once the port is in trunk mode, it may be

assigned a VLAN number other than 1.

switchport access vlan vlan_id

Example:

Router(config-if)# switchport access vlan 2

Step 3

Cisco 800 Series Integrated Services Routers Software Configuration Guide

OL-31704-02 133

Configuring Ethernet Switches

Configuring VLANs

1 2 ... 156 157 158 159 160 161 162 163 164 165 166 ... 443 444

Komentáře k této Příručce

Žádné komentáře

Cisco 4G-LTE-ANTM-O-3 Instalační příručka Strana 161

Komentáře k této Příručce

Související produkty a manuály pro Směrovače Cisco 4G-LTE-ANTM-O-3