Cisco 4G-LTE-ANTM-O-3 Instalační příručka Strana 53

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 444
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 52
Inserting a different type of modem from what was previously removed requires configuration changes
and you must reload the system.
Data Account Provisioning
To provision your modem, you must have an active wireless account with a service provider. A SIM card
must be installed in a GSM 3G wireless card.
Note
To provision your data account, follow these procedures:
Verifying Signal Strength and Service Availability
To verify the signal strength and service availability on your modem, use the following commands in privileged
EXEC mode.
SUMMARY STEPS
1.
show cellular 0 network
2.
show cellular 0 hardware
3.
show cellular 0 connection
4.
show cellular 0 gps
5.
show cellular 0 radio
6.
show cellular 0 profile
7.
show cellular 0 security
8.
show cellular 0 sms
9.
show cellular 0 all
DETAILED STEPS
PurposeCommand or Action
Displays information about the carrier network, cell site, and
available service.
show cellular 0 network
Example:
Router# show cellular 0 network
Step 1
Displays the cellular modem hardware information.show cellular 0 hardware
Example:
Router# show cellular 0 hardware
Step 2
Displays the current active connection state and data
statistics.
show cellular 0 connection
Example:
Router# show cellular 0 connection
Step 3
Cisco 800 Series Integrated Services Routers Software Configuration Guide
OL-31704-02 25
Basic Router Configuration
Configuring the Cellular Wireless WAN Interface
Zobrazit stránku 52
1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 443 444

Komentáře k této Příručce

Žádné komentáře