Cisco 4G-LTE-ANTM-O-3 Instalační příručka stáhnout pdf (Strana 141)

100

101

PurposeCommand or Action

Example:

Router(config)# line aux 0

Enables hardware signal flow control.flowcontrol {none | software [lock] [in | out] |

hardware [in | out]}

Step 18

Example:

Router(config)# flowcontrol hardware

Example for specifying an IP address for the ATM interface through PPP and

IPCP address negotiation and dial backup

The following configuration example specifies an IP address for the ATM interface through PPP and IPCP

address negotiation and dial backup over the console port.

ip name-server 192.168.28.12

ip dhcp excluded-address 192.168.1.1

ip dhcp pool 1

import all

network 192.168.1.0 255.255.255.0

default-router 192.168.1.1

! Need to use your own correct ISP phone number.

modemcap entry MY-USER_MODEM:MSC=&F1S0=1

chat-script Dialout ABORT ERROR ABORT BUSY ““ “AT” OK “ATDT 5555102\T”

TIMEOUT 45 CONNECT \c

interface vlan 1

ip address 192.168.1.1 255.255.255.0

ip nat inside

ip tcp adjust-mss 1452

hold-queue 100 out

! Dial backup and remote management physical interface.

interface Async1

no ip address

encapsulation ppp

dialer in-band

dialer pool-member 3

async default routing

async dynamic routing

async mode dedicated

ppp authentication pap callin

interface ATM0

mtu 1492

no ip address

no atm ilmi-keepalive

pvc 0/35

Cisco 800 Series Integrated Services Routers Software Configuration Guide

OL-31704-02 113

Configuring Backup Data Lines and Remote Management

Example for specifying an IP address for the ATM interface through PPP and IPCP address negotiation and dial

backup

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 443 444

Komentáře k této Příručce

Žádné komentáře

Cisco 4G-LTE-ANTM-O-3 Instalační příručka Strana 141

Komentáře k této Příručce

Související produkty a manuály pro Směrovače Cisco 4G-LTE-ANTM-O-3