
© 2013 Cisco and/or its affiliates. All rights reserved.
BRKCRS-3090
Cisco Public
Problem: Smart Install Client assumes VLAN 1 for initial connectivity, however best
practice is to NOT use VLAN 1 for management.
Workaround: Reconfigure access port on Smart Install Director:
interface Port-channel101
description Connected to clientsw123
switchport
switchport trunk encapsulation dot1q
switchport trunk native vlan 4001
switchport trunk allowed vlan 2-17,4093
switchport mode trunk
logging event link-status
logging event bundle-status
load-interval 30
carrier-delay msec 0
mls qos trust dscp
hold-queue 2000 out
interface Port-channel101
description Connected to clientsw123
switchport
switchport trunk encapsulation dot1q
switchport access vlan 4093
switchport trunk native vlan 4001
switchport trunk allowed vlan 2-17,4093
switchport mode trunk
logging event link-status
logging event bundle-status
load-interval 30
carrier-delay msec 0
mls qos trust dscp
hold-queue 2000 out
Smart Install – VLAN 1 Requirement
29
Komentáře k této Příručce