Cisco SCE 1000 2xGBE Uživatelská příručka Strana 187

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 490
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 186
Chapter 6 Control Configuration
Failure Recovery Mode
SCE 1000 2xGBE Release 2.0.10 User Guide
OL-7117-02 6-41
The figure below, illustrates the Cisco Enterprise MIB structure.
Figure 6-3: Service Control MIB Structure
Loading the MIB Files
The SCE proprietary MIB uses definitions that are defined in other MIBs, such as Pcube MIB
(pcube.mib), and the SNMPv2-SMI. Therefore, the order in which the MIBs are loaded is
important. To avoid errors, the MIBs must be loaded in the proper order.
To load the MIBs:
Step 1 Load the SNMPv2-SMI.
Step 2 Load the SNMPv2-TC.
Step 3 Load pcube.mib.
Step 4 Load pcubeSEMib.mib.
Failure Recovery Mode
The failure-recovery operation-mode command defines the behavior of the system
after boot resulting from failure. The system may return to operational mode, or remain not
operational.
The default value is operational.
[no|default] failure-recovery operation-mode
Zobrazit stránku 186
1 2 ... 182 183 184 185 186 187 188 189 190 191 192 ... 489 490

Komentáře k této Příručce

Žádné komentáře