Cisco SCE 1000 2xGBE Uživatelská příručka stáhnout pdf (Strana 163)

100

101

Chapter 6 Control Configuration

Domain Name (DNS) Settings

SCE 1000 2xGBE Release 2.0.10 User Guide

OL-7117-02 6-17

To enable DNS lookup:

Step 1 From the SCE 1000(config)# prompt, type ip domain-lookup.

To disable DNS lookup:

Step 1 From the SCE 1000(config)# prompt, type no ip domain-lookup.

Name Servers

To specify the address of one or more name servers to use for name and address resolution:

Step 1 From the SCE 1000(config)# prompt, type ip name-server <server-

address1> [<server-address2> [<server-address3>]], and press

Enter.

The addresses of the name servers are set.

EXAMPLE:

The following example shows how to configure the two name server (DNS) IP addresses.

SCE 1000(config)#ip name-server 10.1.1.60 10.1.1.61

To remove the name server address:

Step 1 From the SCE 1000(config)# prompt, type no ip name-server <server-

address1> [<server-address2> [<server-address3>]], and press

Enter.

The addresses of the name servers are removed.

EXAMPLE:

The following example shows how to remove the name server (DNS) IP address.

SCE 1000(config)#no ip name-server 10.1.1.60 10.1.1.61

1 2 ... 158 159 160 161 162 163 164 165 166 167 168 ... 489 490

Komentáře k této Příručce

Žádné komentáře

Cisco SCE 1000 2xGBE Uživatelská příručka Strana 163

Komentáře k této Příručce

Související produkty a manuály pro Sítě Cisco SCE 1000 2xGBE