Cisco NM-16ESW - EtherSwitch Switch Uživatelský manuál stáhnout pdf (Strana 9)

Configuring the Cisco Gigabit EtherSwitch EHWIC

How to Configure Gigabit EtherSwitch EHWICs

Configuring the Cisco Gigabit EtherSwitch EHWIC

OL-23155-01

Configuring a VTP Client

When a switch is in VTP client mode, you cannot change the VLAN configuration on the switch. The

client switch receives VTP updates from a VTP server in the management domain and modifies its

configuration accordingly.

Beginning in global configuration mode, follow these steps to configure the switch as a VTP client.

SUMMARY STEPS

1. vtp mode client

2. vtp domain domain_name

3. vtp password password_value

4. exit

DETAILED STEPS

Disabling VTP (VTP Transparent Mode)

When you configure the switch as VTP transparent, you disable VTP on the switch. A VTP transparent

switch does not send VTP updates and does not act on VTP updates received from other switches.

Beginning in global configuration mode, follow these steps to disable VTP on the switch.

SUMMARY STEPS

1. vtp mode transparent

2. exit

Command Purpose

Step 1

vtp mode client

Example:

Router(config)#vtp mode client

Configures the switch as a VTP client.

Step 2

vtp domain domain_name

Example:

Router(config)#vtp domain domain1

Defines the VTP domain name, which can be up to 32 characters

long.

Step 3

vtp password password_value

Example:

Router(config)#vtp password password2

(Optional) Sets a password, which can be from 8 to 64 characters

long, for the VTP domain.

Step 4

exit

Example:

Router(config)#exit

Exits global configuration mode.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 89 90

Komentáře k této Příručce

Žádné komentáře

Cisco NM-16ESW - EtherSwitch Switch Uživatelský manuál Strana 9

Komentáře k této Příručce

Související produkty a manuály pro Sítě Cisco NM-16ESW - EtherSwitch Switch