Cisco NM-16ESW - EtherSwitch Switch Uživatelský manuál stáhnout pdf (Strana 11)

Configuring the Cisco Gigabit EtherSwitch EHWIC

How to Configure Gigabit EtherSwitch EHWICs

Configuring the Cisco Gigabit EtherSwitch EHWIC

OL-23155-01

DETAILED STEPS

Defining a Range Macro

Use the define interface-range command in global configuration mode to define an interface range

macro:

SUMMARY STEPS

1. configure terminal

2. define interface-range macro-name {gigabitethernet slot/first-interface - last-interface] | vlan

vlan-ID - vlan-ID}

3. exit

Command Purpose

Step 1

configure terminal

Example:

Router#configure terminal

Enters global configuration mode.

Step 2

interface range {gigabitethernet interfacenumber -

interfacenumber | vlan number | macro word}

Example:

Router(config)#interface range gigabitethernet

0/2/0 - 3

Selects the range of interfaces to be configured.

• The space around the dash is required. For

example, the command interface range

gigabitethernet 0/2/0 - 3 is valid; the command

interface range gigabitethernet 0/2/0-3 is not

valid.

• You can enter one macro or up to five

comma-separated ranges.

• Comma-separated ranges can include both

VLANs and physical interfaces.

• You are not required to enter spaces before or

after the comma.

• The interface range command only supports

VLAN interfaces that are configured with the

interface vlan command.

Step 3

exit

Example:

Router(config)#exit

Exits global configuration mode.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 89 90

Komentáře k této Příručce

Žádné komentáře

Cisco NM-16ESW - EtherSwitch Switch Uživatelský manuál Strana 11

Komentáře k této Příručce

Související produkty a manuály pro Sítě Cisco NM-16ESW - EtherSwitch Switch