Cisco CX-FEIP-1TX= Installation and con?guration Uživatelská příručka stáhnout pdf (Strana 381)

100

101

PTP 800 Series User Guide Installing the IF and ground cables

phn-2513_004v000 (Oct 2012)

5-59

To run the IF cable into the building, proceed as follows:

Make an entry point into the building and run the main IF cable into the

building.

Ground the IF cable to the external ground bar outside the building entry point,

as described in Making an IF cable ground point on page 5-54.

Install the bottom LPU inside the building entry point.

Ground the bottom LPU to the master ground bar.

Cut any surplus length from the bottom end of the main IF cable and fit an N

type connector, as described in Fitting an N type connector to an IF cable on

page 5-38.

Connect the main IF cable (from the ODU) to the SURGE port of the bottom LPU.

Connect the LPU-CMU IF cable to the EQUIPMENT port of the bottom LPU and

run it to the location of the CMU.

1 2 ... 376 377 378 379 380 381 382 383 384 385 386 ... 647 648

Komentáře k této Příručce

Žádné komentáře

Cisco CX-FEIP-1TX= Installation and con?guration Uživatelská příručka Strana 381

Komentáře k této Příručce

Související produkty a manuály pro Sítě Cisco CX-FEIP-1TX= Installation and con?guration