Cisco 7120-4T1 - 7120 Router Specifikace stáhnout pdf (Strana 7)

5

Rack-Mount the Router (continued)

22065

0

2

Chassis grounding receptaces

Grounding wire

Grounding lug

Screws

Attach the Grounding Lug

Note: Before you connect power or power

onyour router, we strongly recommendthat

you attach the grounding lug to the chassis

grounding receptacles.

1

Locate the grounding lug and screws.

2

Use the wire stripper to strip one end of

the 6-AWG wire approximately

0.75 inch (19.05 mm).

3

Insert the 6-AWG wire into the wire

receptacle on the grounding lug.

4

Use the crimping tool to carefully crimp

thewirereceptacle around the wire; this

step is required to ensure a proper

mechanical connection.

5

Insert the two screws through the holes

in the grounding lug. Ensure that the

grounding lug does not interfere with

other router hardware.

6

Use a Phillips screwdriver to carefully

tighten the screws until the grounding

lug is held ﬁrmly to the chassis. Do not

overtighten the screws.

7

Connect the opposite end of the

grounding wire to the appropriate

grounding point at your site to ensure

an adequate chassis ground.

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Komentáře k této Příručce

Žádné komentáře