Cisco HWIC Instalační příručka stáhnout pdf (Strana 44)

Cisco HWIC-4ESW and HWIC-D-9ESW EtherSwitch Interface Cards

How to Configure EtherSwitch HWICs

Cisco IOS Release 12.3(8)T4

OL-6454-01

Beginning in privileged EXEC mode, follow these steps to enable IGMP Immediate-Leave processing.

SUMMARY STEPS

1. configure terminal

2. ip igmp snooping vlan

vlan-id

immediate-leave

3. end

DETAILED STEPS

To disable Immediate-Leave processing, follow Steps 1 and 2 to enter interface configuration mode, and

use the no ip igmp snooping vlan vlan-id immediate-leave global configuration command.

Statically Configuring an Interface to Join a Group

Ports normally join multicast groups through the IGMP report message, but you can also statically

configure a host on an interface.

Beginning in privileged EXEC mode, follow these steps to add a port as a member of a multicast group.

SUMMARY STEPS

1. configure terminal

2. ip igmp snooping vlan

vlan-id

static

mac-address

interface

interface-id

3. end

4. show mac-address-table multicast [vlan

vlan-id

] [user | igmp-snooping] [count]

5. copy running-config startup-config

DETAILED STEPS

Command Purpose

Step 1

configure terminal

Enters global configuration mode.

Step 2

ip igmp snooping vlan

vlan-id

immediate-leave

Enables IGMP Immediate-Leave processing on the VLAN interface.

Step 3

end

Returns to privileged EXEC mode.

Command Purpose

Step 1

configure terminal

Enters global configuration mode

Step 2

ip igmp snooping vlan

vlan-id

static

mac-address

interface

interface-id

Statically configures a port as a member of a multicast group:

• vlan-id is the multicast group VLAN ID.

• mac-address is the group MAC address.

• interface-id is the member port.

Step 3

end

Returns to privileged EXEC mode.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 81 82

Komentáře k této Příručce

Žádné komentáře

Cisco HWIC Instalační příručka Strana 44

Komentáře k této Příručce

Související produkty a manuály pro Software Cisco HWIC