Cisco 1231G - Aironet - Wireless Access Point Uživatelský manuál stáhnout pdf (Strana 2)

Flow Control:

Xon/Xoff

Note: If the flow control Xon/Xoff does not work, try using the flow control None.

Q. I have an Aironet 1231 AP. Does Cisco make a 50−foot extension

cable so that I can have the AP in one area and the antenna in another?

A. Yes, the part number of the 50−foot cable is AIR−CAB050LL−R. You can use this cable

to connect your AP to the antenna.

Q. How do you check the radio type on autonomous AP?

A. You can use the show controllers command from the privileged EXEC mode on the AP to

get information on the radio type.

Q. How do you set up an IP address on the AP?

A. By default, the AP requests an IP address through DHCP.

You can also manually set the IP address of the AP. On a Microsoft Windows PC that is

connected to the Ethernet segment, from the DOS prompt, issue this command:

arp −s a.b.c.d 00−12−34−56−78−90

Note: The term a.b.c.d represents the IP address that is to be set on the AP, and

00−12−34−56−78−90 is the MAC address. This address appears on the panel on the bottom

of the AP.

Issue this command in order to verify the address:

ping a.b.c.d

Note: This procedure does not work if the AP has already been assigned an IP address by

another method.

For APs that run VxWorks, you can manually configure the IP address with use of the

"express setup" page. Refer to Radio Configuration and Basic Settings for more information.

For APs that run Cisco IOS Software, you can manually configure the IP address through the

web interface or through the command−line interface (CLI). Refer to the Assigning an IP

Address Using the CLI section of Configuring the Access Point for the First Time.

Q. How do you enable HTTPS access on the AP?

A. In order to enable HTTPS, you must add this command to your AP:

AP(config)#ip http secure−server

When you add the ip http secure−server command, you see the RSA keys required for

secure communication regenerated on the APs.

1 2 3 4 5 6 7 ... 22 23

Žádné komentáře

Cisco 1231G - Aironet - Wireless Access Point Uživatelský manuál Strana 2