Cisco UCS C460 Specifikace Strana 79

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 96
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 78
Send document comments to ucs-docfeedbac[email protected]
3-37
Cisco UCS C460 Server Installation and Service Guide
OL-22326-01z
Chapter 3 Maintaining the Server
Installing or Replacing Server Components
Special Considerations for the Cisco UCS P81E Virtual Interface Card (N2XX-ACPCI01)
The Cisco UCS P81E Virtual Interface Card is a standard-profile, half-length, dual-port 10 Gb PCIe card
with SFP+. See the following special considerations and prerequisites.
This server supports installation of up to two of these cards.
These cards are supported only in PCIe slots 1 and 2 of this server.
Note This card must be installed in PCIe slot 1 to use the Cisco Card NIC mode (see Figure 3-26 on
page 3-34). See also NIC Modes and NIC Redundancy Settings, page 2-11.
This card requires that the server has CIMC firmware version 1.2(1) or later installed. There is a
heartbeat LED on the top and bottom of the card that indicates when firmware is active.
Zobrazit stránku 78
1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 95 96

Komentáře k této Příručce

Žádné komentáře