Cisco AS5200 - Universal Access Server Uživatelský manuál stáhnout pdf (Strana 6)

2 Install the Universal Access Server (continued)

Connect the Ethernet Port for

10BaseT Ethernet LAN Access

You can connect the access server to a 10BaseT or

thick Ethernet network. For a thick Ethernet

connection, proceed to the next section, “Connect

the Ethernet Port for Thick Ethernet LAN Access.”

You will need an Ethernet transceiver and cable to

connect the access server to a 10BaseT hub.

Note: The cable, transceiver, and hub are not

included.

Step 1 Connect an Ethernet transceiver to the

port labeled AUI on the rear panel of the

access server.

Step 2 Connect an Ethernet cable to the Ethernet

transceiver.

Step 3 Connect the other end of the Ethernet

cable to a 10BaseT hub.

Note: The Ethernet ports on the access server and

the hub must have the same baseband.

H10344

Universal access server

Ethernet AUI port (DB-15)

Ethernet

transceiver

10BaseT hub

Straight-through

10BaseT cable

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Žádné komentáře

Cisco AS5200 - Universal Access Server Uživatelský manuál Strana 6