Cisco 2500 SERIES Uživatelský manuál Strana 1

Procházejte online nebo si stáhněte Uživatelský manuál pro Bezpečnostní kamery Cisco 2500 SERIES. Configuring the Cisco 2500 Series Access Server Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 18
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
CHAPTER
Configuring the Cisco 2500 Series Access Server 4-1
Configuring the Cisco 2500
Series Access Server
4
This chapter describes the procedures for configuring the Cisco 2500 series access server
and contains the following sections:
Booting the Access Server for the First Time
Using the Enable Secret and the Enable Password
Configuring the Access Server
To configure your console, you need to connect a terminal to the access server.
Configuration requires access to the console port.
If You Need More Information
The Cisco IOS software running the access server contains extensive features and
functionality. The effective use of many of many of these features is easier if you have more
information at hand. We recommend to you the following resources:
UniverCD
Cisco Information Online (CIO)
Technical Assistance Center (TAC)
Zobrazit stránku 0
1 2 3 4 5 6 ... 17 18

Shrnutí obsahu

Strany 1 - Series Access Server

CHAPTER Configuring the Cisco 2500 Series Access Server 4-1Configuring the Cisco 2500Series Access Server4This chapter describes the procedures for co

Strany 2 - Contacting Customer Service

4-10 Cisco 2500 Series Access Server User GuideConfiguring the Access Server cisco Systems, Inc. 170 West Tasman Drive S

Strany 3 - • Chassis serial number

Configuring the Cisco 2500 Series Access Server 4-11Configuring the Access ServerInterface IP-Address OK? Method Status ProtocolEthernet

Strany 4 - • E-mail: [email protected]

4-12 Cisco 2500 Series Access Server User GuideConfiguring the Access ServerStep 7 In most cases you will use IP routing. If you are using IP routing,

Strany 5 - Configuring the Access Server

Configuring the Cisco 2500 Series Access Server 4-13Configuring the Access ServerStep 2 Set the line speed and the flow control for the asynchronous l

Strany 6 - Router> enable

4-14 Cisco 2500 Series Access Server User GuideConfiguring the Access ServerStep 6 Enter yes if you will be using IPX on your asynchronous lines, In t

Strany 7

Configuring the Cisco 2500 Series Access Server 4-15Configuring the Access ServerStep 3 Determine if you are going to enable IPX on this interface, e

Strany 8

4-16 Cisco 2500 Series Access Server User GuideConfiguring the Access ServerConfigure IP unnumbered on this interface? [no]: yes IP address for thi

Strany 9

Configuring the Cisco 2500 Series Access Server 4-17Configuring the Access ServerConfiguring interface Async6: Default client IP address for this

Strany 10 - Configuring the Access Server

4-18 Cisco 2500 Series Access Server User GuideConfiguring the Access ServerTo store the configuration or changes to your startup configuration, enter a

Strany 11

4-2 Cisco 2500 Series Access Server User GuideIf You Need More InformationAdditional PublicationsFor more information on configuring the Cisco 2500 ser

Strany 12

Configuring the Cisco 2500 Series Access Server 4-3If You Need More InformationAvailable 24 hours a day, 7 days a week, CIO provides a wealth of stan

Strany 13

4-4 Cisco 2500 Series Access Server User GuideBooting the Access Server for the First Time• Software version level and hardware configuration (enter th

Strany 14

Configuring the Cisco 2500 Series Access Server 4-5Configuring the Access ServerThere are two commands you can use to do this, depending on the relea

Strany 15

4-6 Cisco 2500 Series Access Server User GuideConfiguring the Access ServerNote You will need to acquire the correct network addresses from your syste

Strany 16

Configuring the Cisco 2500 Series Access Server 4-7Configuring the Access ServerYou can now enter any changes to the configuration that are desired. P

Strany 17 - Checking Your Settings

4-8 Cisco 2500 Series Access Server User GuideConfiguring the Access ServerThis functionality is coordinated by your system administrator at the site

Strany 18

Configuring the Cisco 2500 Series Access Server 4-9Configuring the Access ServerOnce the access server has determined that AutoInstall is not configur

Komentáře k této Příručce

Žádné komentáře