Cisco GRP Instalační příručka stáhnout pdf (Strana 29)

show boot

GRP Redundant Processor Support 29

Related Commands

hw-module conﬁg-register

redundancy prefer

CONFGEN variable = 419 Conﬁguration sequence number stamp from the Cisco 12000 router chassis in

which the GRP was installed when the startup-conﬁg was saved.

Secondary is in slot 1 Location of secondary GRP.

Secondary BOOT variable =

slot0:gsr-p-mz,1;

Location and name of the software image that will boot on the secondary

GRP.

Secondary CONFIG_FILE variable =

nvram:

Location of the router conﬁguration ﬁle that the secondary GRP will load.

Secondary BOOTLDR variable = Current value of the BOOTLDR variable.

Secondary conﬁguration register is

0x2

Current content of the conﬁguration register.

Secondary CHASSIS_SN variable =

66300963

Serial number of the Cisco 12000 router chassis in which the GRP was

installed when the startup-conﬁg was saved.

Secondary CONFGEN variable =

419

Conﬁguration sequence number stamp from the Cisco 12000 router chassis in

which the GRP was installed when the startup-conﬁg was saved.

Table 3 Show Boot Field Descriptions (Continued)

Field Description

1 2 ... 24 25 26 27 28 29 30 31 32 33 34

Žádné komentáře

Cisco GRP Instalační příručka Strana 29