Cisco Wide Area Virtualization Engine 274 Průvodce řešením problémů Strana 565

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 594
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 564
1-11
Cisco Wide Area Application Services Configuration Guide
OL-26579-01
Chapter 1 Configuring SNMP Monitoring
About SNMP
SNMP-COMMUNITY-MIB
This MIB is documented in RFC 2576.
SNMP-FRAMEWORK-MIB
This MIB is documented in RFC 2571.
SNMP-NOTIFICATION-MIB
This MIB is documented in RFC 3413.
SNMP-TARGET-MIB
This MIB is documented in RFC 3413.
SNMP-USM-MIB
This MIB is documented in RFC 2574.
SNMPv2-MIB
This MIB is documented in RFC 1907. WAAS supports the following notifications from this MIB:
coldStart
linkUp
linkDown
authenticationFailure
SNMP-VACM-MIB
This MIB is documented in RFC 2575.
Downloading MIB Files
You can download the MIB files for most of the MIBS that are supported by a device that is running the
WAAS software from the following Cisco FTP site:
ftp://ftp.cisco.com/pub/mibs/v2
You can download the RFC1213-MIB file (for MIB-II) from the following Cisco FTP site:
ftp://ftp.cisco.com/pub/mibs/v1
The MIB objects that are defined in each MIB are described in the MIB files at the above FTP sites and
are self-explanatory.
Enabling the SNMP Agent on a WAAS Device
By default, the SNMP agent on WAAS devices is disabled and an SNMP community string is not
defined. The SNMP community string is used as a password for authentication when accessing the
SNMP agent on a WAAS device. To be authenticated, the Community Name field of any SNMP message
sent to the WAAS device must match the SNMP community string defined on the WAAS device.
Zobrazit stránku 564
1 2 ... 560 561 562 563 564 565 566 567 568 569 570 ... 593 594

Komentáře k této Příručce

Žádné komentáře