Cisco RSP4+ Bootflash Memory Upgrade to 16MB MEM-16F-RSP4+= Uživatelský manuál stáhnout pdf (Strana 1)

Corporate Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

78-12288-02

RSP4+ Bootflash Memory Upgrade to 16MB

Installation and Configuration Guide

Product Numbers: MEM-16F-RSP4+=

Customer Order Number: DOC-7812288=

Introduction

An 8 MB bootflash image is supplied with the RSP4+, RSP4, RSP2, RSP1 and RSP7000 on the Cisco

7500 series routers. This image is insufficient to store newer, larger Cisco IOS Releases, such as

12.1(4.4)T2 and 12.1(5)T, and future releases on the RSP4+. Use the instructions in this document to

upgrade to a 16-MB bootflash. Alternatively, you can use Cisco IOS Release 12.0(13)S rsp-boot-mz

image or other image, which is less than 7.7 MB in size. Contact the Technical Assistance Center (see

Technical Assistance Center, page 19) for more information on this latter alternative.

Note: The RSP8 has 16 MB of Flash memory and does not encounter this problem.

Objectives

The purpose of this document is to explain how to perform the following procedures:

• Remove the 8-MB SIMM and install a 16-MB SIMM

• Upgrade the bootflash memory image

Contents

This document includes the following sections:

• Related Documentation, page 2

• Installation Requirements, page 3

• Overview, page 9

1 2 3 4 5 6 ... 19 20

Shrnutí obsahu

Strany 1 - Contents

Strany 2 - Related Documentation

10RSP4+ Bootflash Memory Upgrade to 16MB Installation and Configuration Guide78-12288-02Removing the RSP4+Step 6 Use the RSP4+ handle to carefully pul

Strany 3 - Installation Requirements

11RSP4+ Bootflash Memory Upgrade to 16MB Installation and Configuration Guide78-12288-02Removing the SIMMFigure 2 Handling the RSP4+ During Removal an

Strany 4 - Safety Guidelines

12RSP4+ Bootflash Memory Upgrade to 16MB Installation and Configuration Guide78-12288-02Removing the SIMMFigure 3 Location of SIMM on the RSP4+Step 2

Strany 5 - Advarsel

13RSP4+ Bootflash Memory Upgrade to 16MB Installation and Configuration Guide78-12288-02Installing the SIMMFigure 5 Handling a SIMMCaution To prevent

Strany 6 - Installation Warning

14RSP4+ Bootflash Memory Upgrade to 16MB Installation and Configuration Guide78-12288-02Installing the SIMMNote When inserting SIMMs, use firm but not

Strany 7

15RSP4+ Bootflash Memory Upgrade to 16MB Installation and Configuration Guide78-12288-02Installing the RSP4+Installing the RSP4+Follow the steps below

Strany 8 - Wrist Strap Warning

16RSP4+ Bootflash Memory Upgrade to 16MB Installation and Configuration Guide78-12288-02Loading and Configuring the Bootflash ImageStep 1 Boot the rou

Strany 9 - Overview

17RSP4+ Bootflash Memory Upgrade to 16MB Installation and Configuration Guide78-12288-02Loading and Configuring the Bootflash ImageStep 5 To copy the

Strany 10 - Removing the RSP4+

18RSP4+ Bootflash Memory Upgrade to 16MB Installation and Configuration Guide78-12288-02Obtaining DocumentationStep 11 Use the sh bootv command to con

Strany 11 - Removing the SIMM

19RSP4+ Bootflash Memory Upgrade to 16MB Installation and Configuration Guide78-12288-02Obtaining Technical AssistanceDocumentation FeedbackIf you are

Strany 12 - ROUTE SWITCH PROCESSOR 16

2RSP4+ Bootflash Memory Upgrade to 16MB Installation and Configuration Guide78-12288-02Related Documentation• Confirming the Bootflash Memory Size, pa

Strany 13 - Installing the SIMM

20RSP4+ Bootflash Memory Upgrade to 16MB Installation and Configuration Guide78-12288-02Obtaining Technical AssistanceContacting TAC by Using the Cisc

Strany 14

3RSP4+ Bootflash Memory Upgrade to 16MB Installation and Configuration Guide78-12288-02Installation RequirementsInstallation RequirementsBefore upgrad

Strany 15 - Installing the RSP4+

4RSP4+ Bootflash Memory Upgrade to 16MB Installation and Configuration Guide78-12288-02Installation RequirementsTools and Parts RequiredYou need the f

Strany 16

5RSP4+ Bootflash Memory Upgrade to 16MB Installation and Configuration Guide78-12288-02Installation RequirementsAttentionCe symbole d'avertisseme

Strany 17

6RSP4+ Bootflash Memory Upgrade to 16MB Installation and Configuration Guide78-12288-02Installation RequirementsInstallation Warning¡Advertencia!Este

Strany 18 - Obtaining Documentation

7RSP4+ Bootflash Memory Upgrade to 16MB Installation and Configuration Guide78-12288-02Installation RequirementsElectrical Equipment GuidelinesFollow

Strany 19 - Technical Assistance Center

8RSP4+ Bootflash Memory Upgrade to 16MB Installation and Configuration Guide78-12288-02Installation RequirementsWrist Strap WarningWarningDuring this

Strany 20 - Contacting TAC by Telephone

9RSP4+ Bootflash Memory Upgrade to 16MB Installation and Configuration Guide78-12288-02OverviewOverviewBootflash is a single inline memory module (SIM

Další dokumenty pro Sítě Cisco RSP4+ Bootflash Memory Upgrade to 16MB MEM-16F-RSP4+=

Zobrazit dokument Cisco RSP4+ Bootflash Memory Upgrade to 16MB MEM-16F-RSP4+= Specifikace

Cisco RSP4+ Bootflash Memory Upgrade to 16MB MEM-16F-RSP4+= Specifikace (232 stránky)

Komentáře k této Příručce

Žádné komentáře

Cisco RSP4+ Bootflash Memory Upgrade to 16MB MEM-16F-RSP4+= Uživatelský manuál Strana 1

Procházejte online nebo si stáhněte Uživatelský manuál pro Sítě Cisco RSP4+ Bootflash Memory Upgrade to 16MB MEM-16F-RSP4+=. RSP4+ Bootflash Memory Upgrade to 16MB Installation and Uživatelská příručka

Shrnutí obsahu

Další dokumenty pro Sítě Cisco RSP4+ Bootflash Memory Upgrade to 16MB MEM-16F-RSP4+=

Komentáře k této Příručce

Cisco RSP4+ Bootflash Memory Upgrade to 16MB MEM-16F-RSP4+= Uživatelský manuál Strana 1

Procházejte online nebo si stáhněte Uživatelský manuál pro Sítě Cisco RSP4+ Bootflash Memory Upgrade to 16MB MEM-16F-RSP4+=. RSP4+ Bootflash Memory Upgrade to 16MB Installation and Uživatelská příručka

Shrnutí obsahu

Další dokumenty pro Sítě Cisco RSP4+ Bootflash Memory Upgrade to 16MB MEM-16F-RSP4+=

Komentáře k této Příručce

Související produkty a manuály pro Sítě Cisco RSP4+ Bootflash Memory Upgrade to 16MB MEM-16F-RSP4+=