Cisco H.323/SIP Technické informace stáhnout pdf (Strana 79)

Polycom RealPresence Platform Integration with VCS

Task 1: Configuring a SIP Peer

The following steps will configure the DMA System with a SIP Peer for VCS.

To configure a SIP Peer:

1 Log into the DMA System.

2 Navigate to Network > External SIP Peer.

3 In the Actions menu, click Add.

4 Click on the External SIP Peer tab.

a Type a name and description for the SIP Peer.

b Ensure that the Enabled check box is selected.

c In the Next hop address field, type the IP Address or DNS-resolvable name of the

primary VCS node.

d In the Port field, enter the SIP port to use. The default port is 5060.

e (Optional) In the Prefix Range field, enter the prefix associated with the VCS.

Associating a prefix with VCS depends on how you have set up dial plans and rules within

your DMA system. For detailed information, see the Polycom DMA System Operations

Guide.

Note: Prefix Range and Redundant Integrations

For redundant integrations, do not configure a Prefix Range directly on the DMA SIP

Peer.

f In the Type drop-down list, select Other.

g In the Transport Type drop-down list, select TCP.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 94 95

Žádné komentáře

Cisco H.323/SIP Technické informace Strana 79