Cisco Ethernet switch Provozní pokyny Strana 101

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 266
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 100
Chapter 6. IBM eServer BladeCenter system initial setup 87
2. Change the TFTP Root Directory to the location of the Cisco switch firmware to be
updated (Figure 6-7).
Figure 6-7 Switch firmware location
3. Click the Security tab and change the TFTP Server to Transmit and Receive files. Click
OK to save. The TFTP Server is now running.
Figure 6-8 TFTP Server Configuration window Security tab
Upgrading code
Use the Management Module graphical interface to start a Telnet session, as described in the
following steps, or if Remote Management is enabled on the external switch ports, open a
Telnet session from an attached workstations DOS prompt:
1. Access and log on to the Management Module Web interface, as described in “Accessing
the Management Module Web interface” on page 81.
2. From the I/O Module Tasks menu, click Management. The BladeCenter Management
Module window opens.
Zobrazit stránku 100
1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 265 266

Komentáře k této Příručce

Žádné komentáře