Cisco CISCO1721 Instalační příručka Strana 77

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 92
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 76
C-9
Cisco 1721 Router Hardware Installation Guide
78-13834-02
Appendix C Installing and Upgrading Memory and Virtual Private Network Modules
Closing the Chassis
Closing the Chassis
After installing memory or a VPN module on the motherboard, close the chassis
by following these steps:
Step 1 If you disconnected the fan from the motherboard as described in the “Opening
the Chassis” section, reconnect the fan cable to the connector labeled FAN on the
motherboard.
Step 2 Locate the posts that protrude from the inside of the chassis cover, and locate the
corresponding openings on the chassis bottom.
Step 3 Line up the posts with the corresponding openings, as shown in Figure C-8, and
carefully slide the posts into the openings, taking care not to damage the router
motherboard with the posts.
Zobrazit stránku 76
1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 91 92

Komentáře k této Příručce

Žádné komentáře