Cisco Cisco Aironet Wireless LAN Client Specifikace stáhnout pdf (Strana 99)

7-7

Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Linux

OL-1376-02

Chapter 7 Routine Procedures

Removing the Client Adapter

Removing a PC Card

To remove a PC card after it is successfully installed and configured (such as when your laptop is to be

transported), pull the card directly out of the PC card slot. The client adapter is “hot swappable” and can

be inserted and ejected at any time after you have installed the driver.

Removing a PCI Client Adapter

Because PCI client adapters are installed inside desktop computers, which are not designed for portable

use, you should have little reason to remove the adapter. Follow these steps in case you ever need to

remove your PCI client adapter.

Step 1 Completely shut down your computer.

Note When the computer is turned off using the power switch, there still might be power supplied to

the motherboard. To ensure that your computer is completely shut down, unplug the computer’s

power cord from its power source.

Step 2 Disconnect the client adapter’s antenna.

Step 3 Remove the computer cover.

Step 4 Remove the screw from the top of the CPU back panel above the PCI expansion slot that holds your client

adapter.

Step 5 Pull up firmly on the client adapter to release it from the slot, and carefully tilt the adapter to allow it to

clear the opening in the CPU back panel.

Step 6 Reinstall the screw on the CPU back panel, and replace the computer cover.

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 141 142

Žádné komentáře

Cisco Cisco Aironet Wireless LAN Client Specifikace Strana 99