Cisco Blower Module 10000 ESR Instalační příručka Strana 97

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 254
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 96
9-7
Cisco 10000 Series Routers Line Card Hardware Installation Guide
OL-6773-04
Chapter 9 8-Port Fast Ethernet Half-Height Line Card Overview
Cables, Connectors, and Pinouts
Table 9-5 lists the maximum cable length between two nodes in a 100BASE-TX network.
Pinouts
Table 9-6 provides pinout information for the 8-port fast Ethernet half-height line card. The 8-port fast
Ethernet half-height line card does not support software configuration of the MDI mode including
auto-MDIX mode. It does not support Inter-Switch Link (ISL) encapsulation (the card does support
802.1Q VLAN encapsulation), or Fast EtherChannel.
Go to Chapter 16, “Preparing for Installation” to begin the installation or replacement of the line card.
For troubleshooting information, see Chapter 18, “Troubleshooting the Installation.”
Table 9-5 Cabling Limits
Number of Repeaters Maximum Cable Length between 2 Nodes (meters)
0100
1 (Class 1 or 2) 200—100 maximum on each side of repeater
2 (Class 2 only) 205—100 maximum for each span
Table 9-6 Fast Ethernet Port Pinouts—MDI Mode
Pin FE Signal
1TX+
2TX
3RX+
6RX
Zobrazit stránku 96
1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 253 254

Komentáře k této Příručce

Žádné komentáře