Cisco AS5300 - Universal Access Server Instalační příručka stáhnout pdf (Strana 11)

Connect a Console for Local Administrative Access

To configure the Cisco AS5300 from a locally-connected PC or terminal, you will need an RJ-45-to-RJ-45 rollover cable and a

terminal adapter (RJ-45-to-DB-9 or RJ-45-to-DB-25). The cable and adapter are included.

Step 1 Connect one of the adapters, labeled TERMINAL, to the communications port (usually labeled COM) on your PC or

terminal. (This communications port is also known as a console port.)

Step 2 Connect one end of the RJ-45-to-RJ-45 rollover cable to the adapter.

Step 3 Connect the other end of the RJ-45-to-RJ-45 rollover cable to the port labeled CONSOLE on the rear panel of the

Cisco AS5300.

Step 4 Configure your PC terminal emulation software or terminal for 9600 baud, 8 data bits, no parity, and 1 stop bit.

Universal access

server

Console port

(RJ-45)

(labeled CONSOLE)

RJ-45-to-RJ-45

rollover cable

PC (laptop)

RJ-45-to-DB-9 or

RJ-45-to-DB-25 adapter

(labeled TERMINAL)

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Žádné komentáře

Cisco AS5300 - Universal Access Server Instalační příručka Strana 11