Cisco AS2509-RJ Uživatelský manuál stáhnout pdf (Strana 22)

22 Sun Technical Compute Farm Read Me First • December 2000

FIGURE 11 Removing and Replacing the C3524 Ethernet Brackets

▼ To Replace an Ethernet Switch

1. Set the replacement Ethernet switch on a workbench.

2. Using a No. 2 Phillips screwdriver, replace the two screws securing each front and

back mounting bracket to the Ethernet switch (

FIGURE 11).

3. From the front of the rack (

FIGURE 10):

a. Position the Ethernet switch into the rack, making sure that the mounting plate

back mounting screws are properly positioned into the Ethernet switch back

mounting brackets.

b. Align the Ethernet switch front mounting brackets with the mounting plate

front mounting screw holes.

Refer to

FIGURE 12 for proper screw hole position.

c. Using a No. 2 Phillips screwdriver, tighten the front mounting screws securing

the Ethernet switch chassis to the mounting plate.

4. From the back of the rack (

FIGURE 10):

a. Using a No. 2 Phillips screwdriver, tighten the rear mounting screws securing

the Ethernet switch back mounting brackets to the mounting plate.

Cisco 2600

Screw (4)

Front mounting

bracket (2)

(No. 6)

Back mounting

bracket (2)

Screw (4)

(No. 6)

1 2 ... 17 18 19 20 21 22 23 24 25 26

Žádné komentáře

Cisco AS2509-RJ Uživatelský manuál Strana 22