
DES/3DES/AES VPN Encryption Module (AIM-VPN/EPII, AIM-VPN/HPII, AIM-VPN/BPII Family)
clear crypto engine accelerator counter
6
Cisco IOS Release 12.3(7)T
clear crypto engine accelerator counter
To reset the statistical and error counters for a router’s hardware accelerator to zero, use the clear crypto
engine accelerator counter command in privileged EXEC mode.
clear crypto engine accelerator counter
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values
Command Modes Privileged EXEC
Command History
Examples The following example shows the router’s statistical and error counters being cleared to zero:
Router# clear crypto engine accelerator counter
Related Commands
Release Modification
12.1(3)XL This command was introduced for the Cisco uBR905 cable access router.
12.2(2)XA Support was added for the Cisco uBR925 cable access router.
12.2(13)T This command was integrated into Cisco IOS Release 12.2(13)T and
implemented for the AIM-VPN/EPII & AIM-VPN/HPII on the following
platforms: Cisco 2691, Cisco 3660, Cisco 3725, and Cisco 3745.
12.2(15)ZJ This command was implemented for the AIM-VPN/BPII on the following
platforms: Cisco 2610XM, Cisco 2611XM, Cisco 2620XM,
Cisco 2621XM, Cisco 2650XM, and Cisco 2651XM.
12.3(4)T This command was integrated into Cisco IOS Release 12.3(4)T.
Command Description
crypto ca Defines the parameters for the certification authority used for a
session.
crypto cisco Defines the encryption algorithms and other parameters for a
session.
crypto dynamic-map Creates a dynamic map crypto configuration for a session.
crypto engine accelerator Enables the use of the onboard hardware accelerator for IPSec
encryption.
crypto ipsec Defines the IPSec security associations and transformation sets.
crypto isakmp Enables and defines the IKE protocol and its parameters.
crypto key Generates and exchanges keys for a cryptographic session.
crypto map Creates and modifies a crypto map for a session.
Komentáře k této Příručce