Cisco 3040 Instalační příručka stáhnout pdf (Strana 22)

1-8

Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide

OL-10694-01

Chapter 1 Product Overview

Management Options

Using the Command-Line Interface

You can enter Cisco IOS commands and parameters through the CLI. Access the CLI either by

connecting your PC directly to the blade switch console port or through a Telnet session from a remote

PC or workstation.

Follow these steps:

Step 1 Connect the supplied console cable to the standard 9-pin serial port on the PC. Connect the other end of

the cable to the console port on the blade switch.

Step 2 Start a terminal-emulation program on the PC.

Step 3 Configure the PC terminal emulation software for:

• 9600 baud

• 8 data bits

• No parity

• 1 stop bit

• No flow control

Step 4 Use the CLI to enter commands to configure the blade switch. See the blade switch software

configuration guide and command reference for more information.

For quick setup instructions that use the CLI, go to Appendix C, “Configuring the Switch with the

CLI-Based Setup Program.”

Other Management Options

You can use SNMP management applications such as CiscoWorks Small Network Management Solution

(SNMS) to configure and manage the blade switch. You also can manage it from an SNMP-compatible

workstation that is running platforms such as HP OpenView or SunNet Manager.

Network Configurations

Refer to the blade switch software configuration guide on Cisco.com for an explanation of network

configuration concepts. The software configuration guide also provides examples of network

configurations that use the blade switch to create dedicated network segments that are interconnected

through Gigabit Ethernet connections.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 67 68

Žádné komentáře

Cisco 3040 Instalační příručka Strana 22