Cisco 3002 - VPN Hardware Client Uživatelský manuál Strana 2
- Strana / 2
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
Installing the VPN 3002
To install the Cisco VPN 3002 perform these tasks:
1. Use a LAN cable to connect the VPN 3002 public interface to your public
network device or Ethernet hub or switch.
2. Connect the power cable between the VPN 3002 and a reliably grounded
power outlet.
3. Configure the VPN 3002 using one of the following: a browser,
console port, Telnet, or SSH.
Using a Browser to Configure the VPN 3002
1. Use a LAN cable to attach a PC to the private interface (3002) or switch port
(3002-8E) .
2. Enterthedefault IP address (192.168.10.1)in the browser Locationor Address
field.
3. At the VPN 3002 Login prompt, enter the login name admin and the default
password admin. Click Login.
4. In the Main window, select Quick Configuration from the menu. Follow the
online instructions for all subsequent screens. Note that to configure Network
Extension mode, you must change the private interface IP address and disable
PAT.
5. Click Help for context-sensitive online help. When you click Help, you also
reach links for an online Quick Configuration guide that supplements this
Quick Start card, and an online Cisco VPN 3002 Reference publication. These
documents are available only online.
Using a Console Port to Configure the VPN 3002
1. ConnecttheRJ-45serial cable to theconsole port on thebackof the VPN 3002
to the COM1 or another serial port on the PC.
2. Configure a connection to COM1 with settings of 9600 bps, 8 data bits, No
parity, 1 stop bit, and hardware flow control.
3. After the initialization and boot messages complete, press Enter until you see
a login prompt. Enter the login name, admin, and the default password admin.
Press Return.
4. Choose Configuration, then Quick Configuration.
5. Follow the online instructions for subsequent parameters. Be sure that your
entries conform to the formats for current values, displayed in brackets after
the prompt. Note that to configure Network Extension Mode, you must
change the private interface IP address and disable PAT.
Using Telnet or SSH to Configure the VPN 3002
1. Telnet or SSH to the IP address of the VPN 3002 private interface.
2. Follow Steps 3–5 in the “Using a Console Port to Configure the VPN 3002”
section of this card.
What’s Next?
You can configure the system in more detail. In the Main screen of the HTML
interface, select Configuration > Interfaces. You can explore the VPN 3002
Administration and Monitoring functions, also from the Main screen.
For more information, see the Cisco VPN 3002 Getting Started and Reference
publications. Also go to www.cisco.com, and click the Service and Support
section. Find world-wide phone numbers for the Technical Assistance Center at
http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml.
Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 526-4100
Copyright © 2003 CiscoSystems, Inc.All rightsreserved. Cisco,Cisco IOS,Cisco Systems,and theCisco Systemslogo areregistered trademarksof Cisco
Systems, Inc. or its affiliates in the U.S. and certain other countries. All other brands, names, or trademarks mentioned in this document or Web site are
the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company.
(0201R)
Printed in the USA on recycled paper containing 10% postconsumer waste.
78-15408-01B0
DOC-7815408=
LEDs on Front of Unit
LED State Explanation
PWR
green Unit is on and has power.
off Unit is powered off.
SYS flashing amber Unit is performing diagnostics.
solid amber Unit has failed diagnostics.
flashing green DHCP or PPPoE negotiations in process.
green Unit is operational.
VPN off No VPN tunnel exists.
amber Tunnel has failed.
green Tunnel is established.
LEDs on Private and Public Interface Ports
Green The interface is connected to the network.
Flashing amber Data is traveling across the network.
1
2
Související produkty a manuály pro Sítě Cisco 3002 - VPN Hardware Client
(11 stránky)
Sítě Cisco EZXS88W Uživatelský manuál
(2 stránky)
(2 stránky)
Sítě Cisco WRT54G Uživatelský manuál
(23 stránky)
(23 stránky)
Sítě Cisco WTR54GS Uživatelský manuál
(6 stránky)
(6 stránky)
Sítě Cisco MGX-FRSM-HS2 Specifikace
(312 stránky)
(312 stránky)
Sítě Cisco MWR 2941 Instalační manuál
(710 stránky)
(710 stránky)
Sítě Cisco WMP110 Uživatelský manuál
(2 stránky)
(2 stránky)
Sítě Cisco 7000 and 7507 Chassis MAS-7K Specifikace
(74 stránky)
(74 stránky)
Sítě Cisco Ex SERIES Uživatelský manuál
(15 stránky)
(15 stránky)
Sítě Cisco Soho series Uživatelský manuál
(4 stránky)
(4 stránky)
Sítě Cisco AS2509-RJ Uživatelský manuál
(26 stránky)
(26 stránky)
Sítě Cisco WKPC54G Uživatelský manuál
(2 stránky)
(2 stránky)
Kenwood MFJ-286 manuály
Uživatelské manuály a uživatelské příručky pro Mikrofony Kenwood MFJ-286.
Poskytujeme 1 manuály pdf Kenwood MFJ-286 ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Komentáře k této Příručce