Cisco 2524 - Router - EN Uživatelská příručka stáhnout pdf (Strana 18)

3-18 Cisco 2524 and Cisco 2525 Router User Guide

Connecting to the Network

Connecting to a Token Ring Network

If you have a Cisco 2524 router, you can connect the router to your Token Ring network in

one of the following ways:

• Use a shielded Token Ring lobe cable to connect the Token Ring port (DB-9) to a media

attachment unit (MAU). To ensure agency compliance with electromagnetic emissions

requirements (EMI), make sure the cable is shielded. (See Figure 3-18.)

• Use a twisted-pair cable to connect the Token Ring port (RJ-45) to a Token Ring hub.

(See Figure 3-19.)

If the transmission rate of your Token Ring network is 4 Mbps, use a UTP cable. If the

transmission rate of your Token Ring network is 16 Mbps, use an STP cable.

Figure 3-18 Connecting to a MAU

SERIAL 1

SERIAL 0

BRI 0

H5371

Standard IEEE

802.5 connector

DB-9Token Ring

port connector

Token Ring

lobe cable

(not provided)

MAU

Router

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 29 30

Žádné komentáře

Cisco 2524 - Router - EN Uživatelská příručka Strana 18