Cisco 2521LF - 2521LF Router Uživatelský manuál stáhnout pdf (Strana 17)

Release Notes for Cisco IOS Release 11.3(9)T Feature Packs for the Cisco 2500 Series 17

Alternatives to RSL

Erase flash device before writing? [confirm] yes

Flash contains files. Are you sure you want to erase? [confirm] yes

Copy '' from server

as 'c3620-i-mz.0918' into Flash WITH erase? [yes/no] yes

Erasing device... eeeeeeeeeeeeeeee ...erased

Ready to receive file...........C

Verifying checksum... OK (0x5DE8)

Flash device copy took 00:12:06 [hh:mm:ss]

Installing the Router Software by Using a TFTP Server Application

Use this TFTP server application method as an alternative method to install the router software from

the CD-ROM. You can perform this procedure by using a PC (running Microsoft Windows 95 or

Microsoft Windows 3.1), a Macintosh, or a UNIX system. You can use either the copy tftp ﬂash or

copy rcp ﬂash command to download the router software to the router.

First, obtain a TFTP application or a remote copy protocol (rcp) application to set up your computer

as a TFTP server or an rcp server. If you are using a PC running Windows 95, you can use RSL or

the TFTP server included on the feature pack CD-ROM to install the router software. For other

operating systems, a number of TFTP or rcp applications are available from independent software

vendors or as shareware on the World Wide Web.

Note To use an rcp application, follow the same procedure below, but substitute “rcp” for

“TFTP”and use the copy rcp ﬂash command instead of the copy tftp ﬂash command.

Step 1 Install any TFTP server application on the PC. (A PC application is included on the

feature pack CD-ROM for Microsoft Windows 95 only.)

Step 2 Start the TFTP server application on the PC by double-clicking the application icon or its

.exe ﬁlename.

Step 3 Set up the PC as a TFTP server by using the TFTP server application setup or

conﬁguration facility.

Most TFTP server applications include a setup facility that allows you to specify the PC

as a server. For example, from the TFTP menu of one application, select Settings to

display a panel. To conﬁgure the local PC as a server, select the Server checkbox.

Select a root directory where the Cisco IOS ﬁles reside (for example,

d:\cpswinst\images).

Step 4 Establish a console session from your local PC (which is now conﬁgured as a TFTP

server) to the Cisco router by using one of these methods:

• Connect the PC com port to the router console port.

This is the recommended method. When you reload the router with the new image in

Step 20, you remain connected to the router.

Caution Make sure you set up your local PC as a TFTP server. If you do not, you cannot perform

the copy procedure. This caution applies to both TFTP and rcp.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Žádné komentáře

Cisco 2521LF - 2521LF Router Uživatelský manuál Strana 17