Cisco 1750 - 1750 Router Instalační příručka stáhnout pdf (Strana 77)

Cisco 1750 Router Hardware Installation Guide

78-6169-02

Closing the Chassis

After installing memory or data modules on the motherboard, close the chassis by

following these steps:

Step 1 If you disconnected the fan from the motherboard as described in the “Opening

the Chassis” section, reconnect the fan cable to the connector labeled FAN on the

motherboard.

Step 2 Locate the posts that protrude from the inside of the chassis cover and the

corresponding openings on the chassis bottom.

Step 3 Line up the posts with the corresponding openings, as shown in Figure 8, and

carefully slide the posts into the openings. Be careful not to damage the router

motherboard with the posts.

Step 4 Replace the screws that you removed when opening the chassis. (See Figure 1.)

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 83 84

Žádné komentáře

Cisco 1750 - 1750 Router Instalační příručka Strana 77