Cisco 1005-CH - 1005 Router - EN Uživatelský manuál stáhnout pdf (Strana 4)

Upgrading the IPeXchange Software

The IPeXchange software includes a remote shell daemon (RSHD) application, which you can use

to upgrade the IPeXchange server software. You install the RSHD application on a NetWare client

PC, and you use it to retrieve IPeXchange software upgrades from a server located at Cisco Systems.

Install the WinSock RSHD Application

To install the WinSock RSHD application on a client PC, follow these steps:

Step 1 Insert the ﬂoppy disk containing the RSHD application into your ﬂoppy disk drive.

Step 2 From the File menu, choose Run and type a:setup.

A program group called WinSock RSHD is created.

Upgrade Procedure

If necessary, you can upgrade the IPeXchange software if you have a support contract and are a

registered Cisco Connection Online (CCO) user. Once you register, you will receive an access code

that will allow you to retrieve software upgrades.

To upgrade the IPeXchange software that is running on the Cisco 1000 series routers, follow these

steps:

Step 1 To retrieve the upgrade software, connect via ftp to cco.cisco.com. (To download ﬁles

from CCO, you must be running a passive mode capable FTP client.)

• For server software upgrades, change to the directory cisco/internet/ipexchange/1000

or cisco/internet/ipexchange/1005, depending on your platform. Get a copy of the

upgraded software image.

• For client software upgrades, change to the directory cisco/internet/ipexchange/client.

Get a copy of the upgraded software image.

Step 2 From the PC on which you installed the WinSock RSHD application, connect to the Cisco

1000 series router. You can do this by connecting the PC to the router’s console port or

by establishing a Telnet session from the PC to the router. Connecting via the console port

is the preferred method so that when you reload the router in Step 9, you will not lose your

connection to the router.

Step 3 On the PC, start the WinSock RSHD application by double-clicking on the icon. Verify

that the Cisco IPeXchange Window has the IPeXchange router as the gateway.

Step 4 At router prompt, enter the following command to copy the IPeXchange software image

from the PC to the router:

copy rcp flash

Step 5 When prompted, enter the IP address or name of the router.

Step 6 When prompted, enter the full path name of the server software to be copied to the router.

As an example, you might enter c:\cisco\image.mz.

Step 7 Press Return to conﬁrm that you want to copy the ﬁle.

Step 8 Enter yes if you want to erase the old copy of the server software that is in Flash memory.

Step 9 Reload the router:

reload

1 2 3 4 5 6 7 8

Žádné komentáře

Cisco 1005-CH - 1005 Router - EN Uživatelský manuál Strana 4