Cisco MGBLX1 Uživatelský manuál

Quick Start GuideCisco Small Business200 Series Smart Switches

10 200 Series Smart SwitchesLEDsSystem LED—(Green) Lights steady when the switch is powered on, and flashes when booting, performing self tests, and a

200 Series Smart Switches 11Returning the Device to the Factory Default SettingsTo use the Reset button to reboot or reset the smart switch, do the fo

12 200 Series Smart SwitchesWhere to Go From HereSupportCisco Small Business Support Communitywww.cisco.com/go/smallbizsupportCisco Small Business Sup

Americas HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706USAhttp://www.cisco.comSmall Business Support US: 1-866-606-1866Sm

2 200 Series Smart SwitchesWelcomeThank you for choosing the Cisco 200 Series Smart Switch, a Cisco Small Business network communications device. This

200 Series Smart Switches 3Mechanical Overloading—The device must be level, stable, and secure to prevent it from sliding or shifting out-of-position.

4 200 Series Smart SwitchesConnecting Network DevicesTo connect the smart switch to the network:STEP 1 Connect the Ethernet cable to the Ethernet port

200 Series Smart Switches 5200 Series Switches with Power Over EthernetModel Power Dedicated to PoENumber of Ports Supporting PoEPoE Standard Supporte

6 200 Series Smart SwitchesCAUTION Consider the following when connecting switches capable of supplying PoE:The PoE models of the switches are PSE (Po

200 Series Smart Switches 7When the switch is using the factory default IP address, the System LED flashes continuously. When the switch is using a DH

8 200 Series Smart SwitchesCAUTION Make sure that any configuration changes made are saved to the Startup configuration before exiting from the web-ba

200 Series Smart Switches 9Wrong or conflicting IP address: Make sure that you are using the correct IP address of the switch. You can verify the curr