Cisco TANDBERG?150MXP Uživatelský manuál stáhnout pdf (Strana 43)

TANDBERG TANDBERG and Cisco CallManager

D13907.01

To be able to route calls from the SCCP network an H.323-to-H.320 Gateway, configure CallManager

with a Route Pattern to forward a gateway service prefix to forward the call to the H.323 gatekeeper. At

this point, the gatekeeper will then forward the call to the gateway for connection. An example of this

configuration is below, routing all calls beginning with the service prefix of ‘0’ to the H.323 network for

connectivity.

Configuring the CallManager with a Route Pattern for Gateway calls:

1. Insert the Route Pattern, in this example 0 followed by !, meaning any number starting with 0

2. Choose the H.323 Gatway Route List (see chapter 5.3 Call Routing for more information about

Route Pattern, Route List and Route Group).

3. Click on “Insert”.

Both the CallManager and the TANDBERG Gateway is now configured with the necessary setting and

you should now be able to place calls between the SCCP network and the ISDN network.

1 2 ... 38 39 40 41 42 43 44 45 46

Žádné komentáře

Cisco TANDBERG?150MXP Uživatelský manuál Strana 43