Cisco PIX 506 - Firewall Instalační příručka stáhnout pdf (Strana 10)

8 Alternative Ways to Access the PIX 506/506E

You can use a serial terminal emulator from a PC or workstation connected to the Console port for

local administrative access.

You can also use PDM or a console to configure Telnet access to the PIX 506/506E. By default, Telnet

access is not permitted. To Telnet to the PIX 506/506E from the outside perimeter of the firewall,

configure an outside IP address and IPSec for a secure Telnet session. For more information, refer to

the Cisco PIX Firewall and VPN Configuration Guide.

To connect a console for local administrative access:

Step 1 Plug one end of the console cable adapter into a standard 9-pin PC serial port.

Step 2 Plug one end of the blue console cable (72-1259-01) into the PC terminal adapter.

Step 3 Plug the other end of the blue console cable into the Console port.

Step 4 Configure the PC terminal emulation software or terminal for 9600 baud, 8 data bits, no

parity, and 1 stop bit.

Refer to the Cisco PIX Firewall and VPN Configuration Guide for information about how to use the

command-line interface (CLI).

67935

ETHERNET 0

ETHERNET 1

CONSOLE

LINK

POWER

INPUT

USB

ACT

LINK

ACT

Cisco PIX 506E

PC terminal adapter

Blue console cable

POWER

INPUT

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Žádné komentáře

Cisco PIX 506 - Firewall Instalační příručka Strana 10