Cisco ASA5500-HW - Hardware Accessory Kit Network Device Instalační příručka stáhnout pdf (Strana 61)

A-11

Cisco ASA 5500 Series Hardware Installation Guide

78-17374-01

Appendix A Installing and Replacing the SSM

Installing and Replacing the SSM

Step 6 Attach the screws to secure the SSM to the chassis.

Step 7 Enter the hw-mod mod 1 reset command in privileged EXEC mode to reset the SSM.

Step 8 Check the LEDs. If the SSM is installed properly, the POWER LED is solid green and the STATUS LED

flashes green.

Step 9 Connect one end of the RJ-45 cable to the port and the other end of the cable to your network devices. For

more information, see Figure 3-15.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 81 82

Žádné komentáře

Cisco ASA5500-HW - Hardware Accessory Kit Network Device Instalační příručka Strana 61